Your Considerations when Choosing a Split Board
Splitboarding is quite a simple concept where a snowboard that divides lengthwise in two is used as two approach skis for you to access the backcountry. However, if you are already on top of your destination, a simple hardware is provided in order to put back together your ski to make a snowboard that you use to ride back down the mountain. It is said to be more efficient when you use skis with skins on the bottom of your split board instead of having snow shoes or just hiking alone. It makes splitboarding the most efficient way in order to access the backcountry on foot when the long surface area is combined with the stability of the skis under the feet.
Much similar to cross country skiing, splitboarding enables as well for free heel movement particularly if the skins are attached to the bottom of the skis to give uphill traction. It is sometimes called the backcountry or ski touring since you do use your own power so as to access the backcountry, which are normally located on unmaintained trails. It can take you a couple of hours or even a few weeks for the expedition.
Before you can ultimately enjoy splitboarding, it is one important decision to choose the right split board. To help you with this, refer to the site at https://www.youtube.com/watch?v=OzyyU8rw_dg. It is quite expensive but they have a number of different sizes, shapes and intended use that you can select from. Regarding the sizing, this will greatly rely on the purpose of your split board. You must make up your mind whether you will use it throughout the season or just for a short time. You also need to choose if you want backcountry kicking or long distance travel deep into the wild. You should think about as well of having your board when you do overnight trips. There are a number of considerations to take into account prior to making your purchase.
The general rule of thumb when choosing a split board is to have it longer by about five centimeters than your freestyle board. Therefore, once you ride a free-ride board, you should not choose one that is much bigger at all. Once your board is intended merely for power riding, select one that is a slightly longer or have specialty splitboards instead. For overnight trips where you need to carry a heavy load, you should add some length to be used for flotation. Once your board will be used all through the season, adding length must be done more conservatively.
An additional significant consideration is the waist width of your split board. Prefer a waist width that will work well together with the size of your boot. A narrow board from the site at prowder.com will include toe and heel drag that can obstruct your turn. It can also be downright dangerous when you boot out on a steep and firm slope. Once it is too wide, it will be tough to go from one edge to another and your turns will feel sluggish.
